Nikon COOLPIX S6300 Digital Camera User Manual


 
Maximizing Camera Life and Performance
Technical Notes and Index
F3
B Notes on the Monitor
Monitors and electronic viewfinders are constructed with extremely high precision; at least 99.99%
of pixels are effective, with no more than 0.01% being missing or defective. Hence while these
displays may contain pixels that are always lit (white, red, blue, or green) or always off (black), this is
not a malfunction and has no effect on images recorded with the device.
Images in the monitor may be difficult to see under bright lighting.
The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your
Nikon-authorized service representative.
The Battery
Check the battery level before using the camera and replace or charge the battery if necessary. Do
not continue charging once the battery is fully charged as this will result in reduced battery
performance. Whenever possible, carry a fully charged spare battery when taking pictures on
important occasions.
Do not use the battery at ambient temperatures below 0°C (32°F) or above 40°C (104°F).
Charge the battery indoors with an ambient temperature of 5°C to 35°C (41°F to 95°F) before use.
When charging the battery inserted into the COOLPIX S6300 using the Charging AC Adapter
EH-69P or a computer, the charge capacity may decrease at battery temperatures 45°C to 60°C
(113°F to 140°F).
The battery is not charged at battery temperatures below 0°C (32°F) or above 60°C (140°F).
Note that the battery may become hot during use; wait for the battery to cool before charging.
Failure to observe these precautions could damage the battery, impair its performance, or prevent
it from charging normally.
On cold days, the capacity of batteries tends to decrease. If an exhausted battery is used at a low
temperature, the camera will not turn on. Be sure that the battery is fully charged before heading
outside to take pictures in cold weather. Keep spare batteries in a warm place and exchange as
necessary. Once warmed, a cold battery may recover some of its charge.
Dirt on the battery terminals can prevent the camera from functioning. Should the battery
terminals become dirty, wipe them off with a clean, dry cloth before use.
If the battery will not be used for some time, insert it in the camera and run it flat before removing
it for storage. The battery should be stored in a cool location with an ambient temperature of 15°C
to 25°C (59°F to 77°F). Do not store the battery in hot or extremely cold locations.
Always remove the battery from the camera or optional battery charger when it is not being used.
When inserted, minute amounts of current are drawn from the battery even when not in use. This
may result in excessive draining of the battery and complete loss of function. Turning the camera
on or off while the battery is exhausted can result in reduced battery life.
Recharge the battery at least once every six months and completely exhaust it before returning it
to storage.
After removing the battery from the camera or optional battery charger, replace the included
terminal cover and store it in a cool place.
A marked drop in the time a fully-charged battery retains its charge, when used at room
temperature, indicates that the battery needs to be replaced. Purchase a new EN-EL12 battery.
Replace the battery when it no longer holds a charge. Used batteries are a valuable resource.
Please recycle used batteries in accordance with local regulations.