Filter
Top Products
137
Configuring Wireless LAN Settings from the Camera
Wireless Services
Protecting COOLPIX CONNECT Settings Information
A password can be applied to prevent access to wireless network informa-
tion entered in the camera, including the network profiles and recipient e-
mail addresses, by third parties if the camera should be lost or stolen, or oth-
erwise compromised. In addition, all camera settings can be restored to their
default settings and data stored in the camera’s internal memory can be
deleted before the camera is transferred to another owner or discarded.
Applying a Password
Follow the procedure described below to apply a password with the camera.
When a password is applied, the correct password must be entered to use
COOLPIX CONNECT services.
1 Select [Password] from the [Wireless set-
tings] option in the camera’s setup menu
and press d.
The password screen will be displayed.
2 Select [Set/change password] and press
d.
3 Specify a password or edit the current
password.
If a password has not been applied, enter a password
in the new password screen and press the shutter-
release button. The password should consist of four
numbers.
To edit the password, enter the current password in
the current password screen and press the shutter-
release button. When the new password screen is dis-
played, enter a new password and press the shutter-
release button.
When a password is entered, the re-enter password
screen will be displayed for confirming the password.
Enter the correct password again and press the shut-
ter-release button.
Wireless settings
Network profile
Sender
Address options
Picture Bank
Password
Set/change password
Delete password
Password
New password
Confirm
Back
1234
Current password
Confirm
Back
1234