Filter
Top Products
150
Using Picture Bank
Wireless Services
Uploading All Pictures at Once
By default, the camera automatically uploads pictures that have not yet been
uploaded to a Picture Bank server whenever the AC adapter is connected to
the camera to charge the battery.
1 Connect the power cable and AC adapter 1.
2 Turn off the camera.
If the power-on (green) lamp is lit, press the power
switch to turn off the camera. Picture upload can-
not be initiated by connecting the AC adapter
when the camera is turned on.
3 Connect the AC adapter to the camera’s multi connector 2.
The multi connector should be fully inserted.
4 Plug the power cable into an outlet 3.
The AC adapter power-on lamp will light 4.
When the camera is turned on and the message, [Starting upload to Picture Bank],
is displayed, Picture Bank begins uploading pictures.
To cancel picture upload, press d.
Once upload is complete, the camera turns off, the power-on lamp blinks orange,
and the battery begins charging.
1
24
3