Filter
Top Products
160
Technical Notes
Error Messages
The following table lists the error messages and other warnings displayed in
the monitor, as well as the solutions for dealing with them.
Display Problem Solution c
S (blinks) Clock not set. Set clock. 110
w Battery running low. Prepare to charge or
change battery.
16
K
Warning!
Battery
exhausted.
Battery exhausted. Charge or change bat-
tery.
16
p (● blinks red) Camera cannot focus. • Refocus.
• Use focus lock.
26, 27,
99
I
Warning!!
please wait for the
camera to finish
recording.
y
Camera cannot perform
other operations until
recording is complete.
Wait until message clears
from display automati-
cally when recording is
complete.
27
K
Memory card is write
protected.
Write-protect switch is in
“lock” position.
Slide write-protect to
“write” position.
21
No card present. Pictmotion mode
selected when no mem-
ory card is inserted.
Insert memory card. 20
I
This card cannot be
used.
Error accessing memory
card.
• Use approved card.
• Check that connectors
are clean.
• Confirm that memory
card is correctly
inserted.
154
20
20
I
Warning!This card
cannot be read.
I
Card is not formatted.
No
Format
Memory card has not
been formatted for use in
camera.
Choose [Format] and
press d to format card,
or turn camera off and
replace card.
21
K
Out of memory.
Memory card is full. • Choose smaller image
size.
• Delete pictures or
sound files.
•
Insert new memory card.
•
Remove memory card
and use internal memory.
91
28, 70,
74
20
21