For more information on:
Changing Camera Type, Port and Rate Settings
The default serial port data-transfer rate is 115,200 bps. If you experience
communications problems, choose a lower data-transfer rate until you
find one that works as described in “Changing Camera Type, Port and Rate
Settings”.
Browsing Image Files: Browsing Image Files From Your Camera
9
Connection error
If the computer is unable to establish connection with the cam-
era, the following dialog box will appear.
After clicking OK to close the dialog box, check to be sure
that:
• the camera is correctly connected to the computer
• the camera’s selector dial is not set to OFF
• the USB or serial cable is connected correctly as de-
scribed in the documentation provided with the com-
puter and the camera
• no other hardware is connected to the selected port
• the camera’s batteries are inserted correctly
• the batteries are not exhausted or dead
• if you are using the AC adapter (sold separately), it is
properly connected
This connection error dialog box will also appear if you speci-
fied the wrong port during installation. Choose the proper
camera type in the Digital Camera Settings dialog box.