Filter
Top Products
24
Using Built-In Flash
Use the built-in flash not only
when the ready-light blinks, but
also when your subject is
in
shadow or backlit.
See pages
51
to 55.
Auto Rewind
When the film reaches the end
of
the roll, auto rewind begins.
During rewinding,
ta
and
~
blink in the LCD panel. After rewind
automatically stops, frame counter shows E and
ta
blinks for a
few seconds. You can then remove film cartridge.
• When battery power is very weak, or when the temperature is
very low, film may not rewind at the end
of
roll and
Err
appears
in
the LCD panel.
In
this case, replace battery with a fresh one,
or wait for the temperature to rise and then press the rewind
button.
To rewind film at mid-roll: Press the rewind button on the
camera bottom.