Nikon N75 Security Camera User Manual


 
Built-In SpeedlightlReady-Light
Built-in Speedlight and TTL Flash modes
This camera
is
equipped with a built-
in
Speedlight that provides
an
angle of
coverage for a 28mm lens with a guide number
of
12/39
(ISO
100, m/ft.).
When the subject
is
dark or backlit,
in
'8' or Vari-Program (except
in
Iij
or
~),
the built-in Speedlight automatically pops up. When the shutter
is
released, the flash fires
to
create natural-looking flash photography utilising 3D
Multi-Sensor
Balanced Fill-Flash or
Multi-Sensor
Balanced Fill-Flash.
In
P, S, A or M exposure mode, when the subject
is
dark or backlit, flash
recommended indication
~
blinks
in
the viewfinder, and the Speedlight pops
up when the Speedlight lock-release button
is
pressed and the 3D
Multi-
Sensor
Balanced
Fill-Flash or
Multi-Sensor
Balanced Fill-Flash
is
possible.
(In
M exposure mode,
Standard
TTL Flash
is
selected.)
In
addition to
shooting
in
dim light, the flash can be used
in
daylight to reduce shadows on
the main subject or to put catchlights
in
your subject's eyes.
Five flash sync
modes-Front-Curtain
Sync (Normal Sync),
Slow
Sync,
Rear-Curtain Sync, Red-Eye
Reduction
and Red-Eye
Reduction
with
Slow
Sync-are
available with this camera.
• See below for the
TIL
Flash modes, page 95 for using the built-in Speedlight and page
92 for the flash sync modes .
..
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The
following
TTL
Auto
Flash
modes
are
available
with
built-in
Speed
light
depending
on
the
type
of
lens
used.
90
Lens
TTL
Auto
Flash
mode
D-
or
G-type Nikkor lens
3D Multi-Sensor Balanced Fill-Flash"
(with Distance Information and Monitor Pre-Flash'2)
CPU
Nikkor
lens
other
than
D/
G-
Multi-Sensor Balanced Fill-Flash"
type
(except
AF
Nikkor
for
F3AF)
(with Monitor Pre-Flash
'2)
Non-CPU Nikkor lens Standard
TIL
'3
'1 When built-in Speedlight
is
used and the exposure mode
is
set to Manual,
TTL
Auto Flash
mode
automatically changes to Standard
TTL
Fla
sh.
*2
To
cancel
Monitor
Pre-Flash, select Manual exposure mode.
*3 Monitor-Pre Flash
is
not
fired in Standard
TTL
Fla
sh.