Nikon P5100 Digital Camera User Manual


 
112
Shooting Options: The Shooting Menu
Shooting, Playback and Setup Menus
P Reset User Setting
Choose [Yes] to restore all settings in the selected user setting bank to their default
values. For further information on settings that can be stored in user setting banks,
see [User setting] (A 111).
Q Distortion Control
Specify whether or not the distortion is corrected. Enabling distortion control
reduces the size of the frame.
Restrictions on Camera Settings
Restrictions apply to the following settings in A (auto), P, S, A, M, and B (high
sensitivity) modes.
Q On
Distortion at frame peripheries is corrected.
k Off (default setting)
No distortion correction performed.
Flash mode
Flash mode is disabled (W) when [Continuous], [BSS], or [Multi-shot 16] is selected
for [Continuous], when [Auto bracketing] is enabled, or at [Converter] settings of
[Wide-angle converter] or [Telephoto converter]. When [Continuous] is set to
[Continuous flash], the flash mode is set to X. Applied setting is restored when
[Single] or [Intvl timer shooting] is selected for [Continuous], or [Auto bracketing] is
turned off.
Self-timer
If self-timer is on, only one picture will be shot when shutter is released, regardless
of settings chosen for [Continuous] and [Auto bracketing]. Applied [Continuous]
and [Auto bracketing] settings are restored when picture is shot or self-timer is
turned off.