Nikon P5100 Digital Camera User Manual


 
37
Shooting in the Scene Mode
Shooting Suited for the Scene
* Other settings can be selected.
1
Fill flash with slow sync and red-eye reduction.
2
Other settings can be selected.
1
Fill flash with slow sync and red-eye reduction. Other settings can be selected.
2
Other settings can be selected.
O: For those scene modes with O, use of a tripod is recommended. Turn vibration reduction
(A128) off when using a tripod.
Q: Pictures shot in scene modes utilizing Q may be processed to reduce noise and therefore take
longer to record.
d Sports
Use this mode for dynamic action shots that freeze the action
in a single shot and record motion in a series of pictures.
While the shutter-release button is pressed halfway, the camera
focuses continuously until focus is acquired and locked.
While the shutter-release button is held down, the camera
shoots at a rate of about 1.1 frames per second (fps) when
image quality is set to Normal and image size is set to F
(4,000 × 3,000). This rate is maintained for up to 5 pictures.
Focus, exposure compensation, and white balance are fixed at values determined with the
first shot in each series.
The maximum frame rate with continuous shooting may vary depending upon the
current image mode setting and the memory card used.
Camera focuses on subject in center of frame.
m W n Off p A o 0.0* h Off
e Night portrait OQ
Use this mode to achieve a natural balance between the main
subject and background lighting in portraits shot at night.
The camera detects and focuses on a face looking toward the
camera (Shooting with Face-Priority A106).
If the camera detects multiple faces, the camera focuses on
the face closest to the camera.
If no face is recognized, the camera will focus on the subject in the center focus area.
Digital zoom is not available.
m V
1
n Off
2
p A o 0.0
2
h Auto
2
f Party/indoor
Captures the effects of candlelight and other indoor
background lighting.
Camera focuses on subject in center of frame.
As pictures are easily affected by camera shake, check the
[Vibration reduction] (A 128) setting and hold the camera
steadily.
m V
1
n Off
2
p A o 0.0
2
h Auto
2