Nikon P5100 Digital Camera User Manual


 
113
Shooting Options: The Shooting Menu
Shooting, Playback and Setup Menus
Focus mode
[B Infinity] is not available when [Continuous] is set to [Continuous flash]. If
[Continuous] is set to [Continuous flash] while focus mode is set to [B Infinity], the
focus mode setting automatically switches to [A Autofocus].
When [Face priority] is selected for [AF area mode], setting focus mode to [B
Infinity] changes [AF area mode] to [Auto]. Selecting an option other than [B
Infinity] for focus mode restores [AF area mode] to [Face priority].
Optimize image
Selecting [Black-and-white] for [Optimize image] changes [White balance] to [Auto].
Selecting an option other than [Black-and-white] for [Optimize image] restores the
original [White balance] setting.
Enabling the [B&W + color] option (w) for the [Black-and-white] item in the
[Optimize image] menu changes the [Continuous] setting to [Single] and the [Auto
bracketing] setting to [Off]. These [Continuous] and [Auto bracketing] settings do
not change when the [B&W + color] option is disabled.
ISO sensitivity
[Image size] cannot be set to [F 4000×3000], [E 3264×2448], [I 3984×2656], [G
3968×2232], and [H 2992×2992] when [ISO sensitivity] is set to [3200].
If [ISO sensitivity] is set to [3200] while [Image size] is set to [F 4000×3000],
[E 3264×2448], [I 3984×2656], [G 3968×2232], or [H 2992×2992], the [Image
size] setting automatically switches to [D 2592×1944]. When any option other than
[3200] is next selected for [ISO sensitivity], the original image size setting is restored.
Continuous
Selecting an option other than [Single] for [Continuous] turns [Auto bracketing] off.
Selecting [Multi-shot 16] changes image quality setting to [b Normal] and image
size setting to [D 2592×1944].
Auto bracketing
When [Auto bracketing] is enabled, [Continuous] will be set to [Single] and the flash
mode will be disabled (W).
Noise reduction
When [Auto] of [Noise reduction] is applied with [Continuous] set to an option
other than [Single] or [Intvl timer shooting], or with [Auto bracketing] set to an
option other than [Off], noise reduction will not be performed. Selecting [On] for
[Noise reduction] changes [Continuous] to [Single], when an option other than
[Intvl timer shooting] is selected for [Continuous], and [Auto bracketing] to [Off].