Nikon P5100 Digital Camera User Manual


 
39
Shooting in the Scene Mode
Shooting Suited for the Scene
* Other settings can be selected.
* Other settings can be selected. Note that the flash may be unable to light entire subject at
distances of less than 30 cm (11.8 in.)
1
Other settings can be selected.
2
Also p (macro close-up) can be selected.
O: For those scene modes with O, use of a tripod is recommended. Turn vibration reduction
(A128) off when using a tripod.
Q: Pictures shot in scene modes utilizing Q may be processed to reduce noise and therefore take
longer to record.
j Night landscape OQ
Slow shutter speeds are used to produce stunning night
landscapes.
Camera focuses at infinity. When the shutter-release button is
pressed halfway, the AF lamp (A26) always lights. Note,
however, focus may not be set for near subjects, while the
camera focuses at infinity.
m W n Off* p B o 0.0* h Off
k Close up
Photograph flowers, insects and other small objects at close range.
D (macro close-up) is selected for focus mode (A33) and
the camera automatically zooms to the position at the
closest distance at which the camera can focus.
The camera can focus at distances as close as 4 cm (1.6 in.) at
the wide-angle zoom position at which F glows green.
The closest distance at which the camera can focus varies depending upon zoom position.
[AF area mode] is set to [Manual] (A 105). When k is pressed, camera focuses on
subject in active focus area.
While the shutter-release button is pressed halfway, the camera focuses continuously
until focus is acquired and locked.
As pictures are easily affected by camera shake, check the [Vibration reduction] (A128)
setting and hold the camera steadily.
m U* n Off* ppo 0.0* h Auto*
l Museum
Use indoors where flash photography is prohibited (for
example, in museums and art galleries) or in other settings in
which you do not want to use the flash.
Camera focuses on subject in center of frame.
[BSS] (Best Shot Selector) (A 101) is used when shooting.
As pictures are easily affected by camera shake, check the
[Vibration reduction] (A 128) setting and hold the camera
steadily.
m W n Off
1
p A
2
o 0.0
1
h Off