Nikon S6100 Camcorder User Manual


 
162
Setup Menu
Basic Camera Setup
k Auto Off
When the camera is on and a period of time passes without any operations having
been performed, the monitor will be turned off and the camera will enter standby
mode (A 21) to save power.
In this option, set the time allowed to elapse before the camera enters standby
mode. 30 s, 1 min (default setting), 5 min, and 30 min can be selected.
Tap the bottom tab (A 150) M Tap z (Setup menu) M kAuto off
C When the Monitor Turns off for the Power Saving Function
Power-on lamp blinks in standby mode.
Camera turns off after three minutes passes in standby mode.
To reactivate the monitor while the power on lamp is blinking, press any of the following buttons:
- The power switch, shutter-release button, A button, c button, or b (e movie-record)
button
C Auto Off Settings
T
he time allowed to elapse before the camera enters standby mode is fixed in the following
situations:
When a setting screen, mode selection menu, or setup menu is displayed: three minutes
During slide show playback: up to 30 minutes
When the AC adapter EH-62F is connected: 30 minutes