Filter
Top Products
21
Charging the Battery
First Steps
Turning On and Off the Camera
To turn on the camera, press the power switch. The
power-on lamp (green) will light and the monitor will
turn on (the power-on lamp turns off when the
monitor turns on).
To turn off the camera, press the power switch again.
When the camera is turned off, both the power-on lamp and monitor will turn off.
• If the camera is turned off, hold down the c button to turn the camera on in
playback mode (A 32).
C Power Saving Function (Auto Off)
If no operations are performed for a while, the monitor will turn off, the camera will enter standby
mode, and the power-on lamp will blink. If no operations are performed for another three minutes,
the camera will turn off automatically.
T
o reactivate the monitor while the power on lamp is blinking, press any of the following buttons:
- Power switch, shutter-release button, A button, c button or b (e movie-record) button
• Camera enters standby mode in about a minute (default setting) during shooting or playback
mode.
• The time allowed to elapse before the camera enters standby mode can be changed from the
Auto off option (A162) in the setup menu (A149).