Filter
Top Products
DSD/00001/7194.5
5
*** COPY FILES ***
# SELECT No.>
---------------------------------------------------------------------
1. FILE COPY
2. FILE CREATE
1: 2: 3: 4: 5: 6: 7: 8:PRINT
FIG.4
14. Type 1 and the Enter ↵ key on the keyboard. Wait until the DPR displays the menu shown in
FIG.5.
*** FILE COPY ***
# SELECT No.>
---------------------------------------------------------------------
DEV. FILE NAME DEV. FILE NAME DEV. FILE NAME
1.MKP.SYS : :
2.M510SYS.FIL : :
: : :
: : :
1:ALL 2:FROM 3:BACK 4:NEXT 5: 6:CHANGE 7:
8:PRINT
FIG.5
15. Type 2 and the Enter ↵ key on the keyboard. Wait until file number 2 (M510SYS.FIL) has
been copied.
16. Press the OPS. Menu on the keyboard. The DPR displays the menu shown in FIG.1.
17. Press the function key F8 (Exit) on the keyboard. Wait until the DPR displays the message ”BE
SURE TO SET BOOT SWITCH ON WD SIDE AND PRESS RESET SWITCH”.
18. Remove the Program Floppy Disk 1/3.
19. Switch OFF the LOCAL POWER switch on the rear side of the DPR (FIG12- ¯).
20. Wait 10 seconds and switch ON the LOCAL POWER button on the rear side of the DPR
(FIG12- ¯). Wait until the DPR displays the message ”Please insert system floppy disk & hit
any key then restart disk mount”.
21. Insert the MU5907 SPECIAL TOOL for YEAR 2000 floppy disk into the FD drive and press
the Enter ↵ key on the keyboard. Wait until the DPR displays the following messages (FIG.6).