Filter
Top Products
DSD/00001/7194.5
14
Year 2000 Conversion Instructions and Test Procedure
OLYMPUS AU600 Automated Chemistry Analyzer
Year 2000 Conversion Instructions:
12. Press the Power switch on the analyzer and then press the “Q” key while the * is displayed in
the upper left hand corner of the screen. The System Maintenance Menu will be displayed.
13. Type “14” and press enter↵ to select option 14. Go to DOS.
14. Type “date” and press enter↵. Follow the prompts to enter the correct date within the year
2000 and press enter↵.
15. Press the Em. Stop switch to remove power from the analyzer.
Press the Reset switch and then the Power switch to restore power and load the program on the
analyzer. Check that the correct date is displayed in the upper right corner of the screen. No further
action is required.
Year 2000 Test Procedure:
Use the following steps to test for the change to the year 2000 and then reset to the current date.
16. Press the Power switch on the analyzer and then press the “Q” key while the * is displayed in
the upper left hand corner of the screen. The System Maintenance Menu will be displayed.
17. Type “14” and press enter↵ to select option 14. Go to DOS.
18. Type “date” and press enter↵. Follow the prompts to enter the date you wish within the year
2000 and press enter↵.
19. Press the Em. Stop switch to remove power from the analyzer.
Press the Reset switch and then the Power switch to restore power and load the program on the
analyzer. Check that the date you entered is displayed in the upper right corner of the screen.
When testing is complete, use the following steps to return to the current date.
20. Perform an end process and wait 15 seconds.
21. Press the Power switch on the analyzer and then press the “Q” key while the * is displayed in
the upper left hand corner of the screen. The System Maintenance Menu will be displayed.
22. Type “14” and press enter↵ to select option 14. Go to DOS.
23. Type “date” and press enter↵. Follow the prompts to enter the current date and press enter↵.