Filter
Top Products
100
EN
Customizing your camera
8
U DISP/PC
VIDEO OUT
You can select NTSC or PAL according to your TV’s video signal type.
You will need to set this when you want to connect the camera to a TV and play back images
in a foreign country. Make sure the correct video signal type is selected before connecting the
video cable. If you use the wrong video signal type, recorded pictures will not play back
properly on your TV.
TV video signal types in major countries and regions
Check the video signal type before connecting the camera to your TV.
SLEEP
After a specified period of time elapses with no operations being performed, the camera
enters the sleep mode (stand-by) to save battery power. After the super control panel is
displayed for a specified period of time, the backlight turns off. After a specific period of time
has further passed, the camera enters sleep mode. [SLEEP] lets you select sleep timer from
[1MIN], [3MIN], [5MIN], or [10MIN], [OFF] cancels the sleep mode.
The camera activates again as soon as you touch any button (the shutter button, q button,
etc.).
BACKLIT LCD (Backlight timer)
To save battery power, after the super control panel is displayed for a specified period of
time, the monitor backlight turns off and the monitor darkens. Select from [8SEC], [30SEC],
or [1MIN] for the time until the backlight turns off. [HOLD] sets the backlight to stay on.
The monitor backlight turns on again as soon as you touch any button (the shutter button,
arrow pad, etc.).
4 h TIMER (Auto power off)
You can set the camera to turn off automatically if not operated for 4 hours. It will not turn off
if this is set to [OFF].
USB MODE
You can connect the camera directly to a computer or printer with the provided USB cable. If
you specify the device you are connecting to beforehand, you can skip the USB connection
setting procedure normally required every time you connect the cable to the camera. For
details on how to connect the camera to either device, refer to “Connecting the camera to a
printer” (gP. 112) and “Connecting the camera to a computer” (gP. 116).
[AUTO]
The selection screen for the USB connection will be displayed every time you connect
the cable to a computer or printer.
[STORAGE]
Allows you to transfer images to a computer. Also, select to use the OLYMPUS
Master software via PC connection.
[MTP]
Allows you to transfer images to a computer running Windows Vista without using the
OLYMPUS Master software.
[CONTROL]
Allows you to control the camera from a PC using the optional OLYMPUS Studio.
NTSC North America, Japan, Taiwan, Korea
PAL European countries, China
s0023_e_00_0_unified.book Page 100 Monday, February 2, 2009 5:18 PM