Filter
Top Products
75
EN
5
Flash shooting
Slow synchronization (2nd curtain) #SLOW2/2nd CURTAIN
2nd curtain flash fires just before the shutter closes. Changing the flash timing can create
interesting effects in your picture, such as expressing the movement of a car by showing the
tail-lights streaming backwards. The slower the shutter speed, the better the effects turn out.
In S/M mode, the flash always fires.
When the shutter speed is set to 2 sec.
Slow synchronization (1st curtain)/Red-eye reduction flash !SLOW
While using slow synchronization with flash shooting, you can also use this function to
achieve red-eye reduction. When shooting a subject against a night scene, this function
allows you to reduce the red-eye phenomenon. As the time from emitting pre-flashes to
shooting is long in 2nd curtain synchronization, it is difficult to achieve red-eye reduction.
Hence, only 1st curtain synchronization setting is available.
Fill-in flash #
The flash fires regardless of the light conditions.
This mode is useful for eliminating shadows on
the subject’s face (such as shadows from tree
leaves), in a backlight situation, or for correcting
the color shift produced by artificial lighting
(especially fluorescent light).
x Notes
• When the flash fires, the shutter speed is set to 1/180 sec. or less. When shooting a subject
against a bright background with the fill-in flash, the background may be overexposed. In this
case, use the optional FL-50R external flash or a similar flash and shoot in the Super FP flash
mode. g“Super FP flash” (P. 80)
Flash off $
The flash does not fire.
Even in this mode, the flash can be used as an AF illuminator when it is raised. g“AF
ILLUMINAT.” (P. 95)
2nd curtain
1st curtain
2nd curtain flash fires
1st curtain flash fires
Shutter closes
Shutter fully opens
2 seconds
2
seconds
0
seconds
s0023_e_00_0_unified.book Page 75 Monday, February 2, 2009 5:18 PM