Filter
Top Products
37
EN
1
Using live view
Taking a picture with [IMAGER AF]
1 Press the shutter button halfway.
• When the focus is locked, the AF confirmation mark and
AF target mark light up.
2 Press the shutter button all the way to take a
picture.
Taking a picture with [AF SENSOR]
1 Press the shutter button all the way.
• The mirror is lowered and the picture is taken after the
focus is locked.
• The image that was displayed on the monitor before
lowering the mirror freezes during focusing.
• If correct focus cannot be obtained, you will hear the
sound of the shutter but the picture will not be taken.
• To focus in advance, hold down the AEL/AFL button
and press the shutter button. When the focus is locked,
the AF confirmation mark lights up. When the AF
confirmation mark is blinking, the focus is not locked.
Taking a picture with [HYBRID AF]
1 Press the shutter button halfway.
• The Imager AF will be activated and you can check the
subject on the LCD monitor.
• When the Imager AF achieves approximate focus, the n
mark lights up.
2 Press the shutter button all the way.
• The picture is taken in a similar way as when using [AF
SENSOR].
Shooting while changing the angle of the LCD monitor
You can change the angle of the LCD monitor on the
camera. This enables you to shoot at an awkward
angle while checking the subject’s composition on the
LCD monitor.
• Slowly rotate the LCD monitor within the moveable
range.
250
250
F5.6
F5.6
L
N
N
38
38
I
-
AF
AF confirmation mark
AF target mark
250
250
F5.6
F5.6
L
N
N
38
38
AF confirmation mark
250
250
F5.6
F5.6
L
N
N
38
38
o
n mark
270°
s0023_e_00_0_unified.book Page 37 Monday, February 2, 2009 5:18 PM