Filter
Top Products
64
EN
3
Focusing and shooting functions
Bulb shooting with the remote control
Set the mode dial to M, then set the shutter speed to [BULB].
g“Bulb shooting” (P. 47)
You can reduce the amount of camera shake that easily occurs when shooting in low light
situations or shooting with high magnification.
OFF Image stabilizer is off.
I.S. 1 Image stabilizer is on.
I.S. 2 This is used for panning with the camera in the horizontal direction to achieve a
blurred background. The horizontal image stabilizer is turned off, and only the
vertical image stabilizer is activated.
I.S. 3 This is used for panning with the camera in the vertical direction to achieve a blurred
background (tilting). The vertical image stabilizer is turned off, and only the horizontal
image stabilizer is activated.
Setting the focal length
By setting the focal length of the lens in advance, you can
use the image stabilizer function with lenses other than
Four Thirds system lenses. This setting is deactivated
when a Four Thirds system lens is attached.
1 Press the F button when the image stabilizer is
turned on.
2 Use the control dial or fg to set the focal length
and press i.
Focal lengths that can be set
• If the focal length of the lens you are using is not listed, select the closest value.
Image stabilizer
Direct button oj
Viewfinder
: OFF
: I.S. 1
: I.S. 2
: I.S. 3
8mm 10mm 12mm 16mm 18mm 21mm 24mm 28mm 30mm 35mm
40 mm 48 mm 50 mm 55mm 65 mm 70 mm 75 mm 80mm 85 mm 90 mm
100 mm 105 mm 120 mm 135 mm 150 mm 180 mm 200 mm 210 mm 250 mm 300 mm
350 mm 400 mm 500 mm 600 mm 800 mm
1000 mm
Press the W button on the remote
control to open the shutter.
When the time set in “BULB
TIMER” (gP. 102) elapses, the
shutter closes automatically.
Press the T button to close the
shutter.
o button
j
I.S. 1 I.S. 2 I.S. 3
IMAGE STABILIZER
FOCAL LENGTH
mm
OFF
50
SET
s0023_e_00_0_unified.book Page 64 Monday, February 2, 2009 5:18 PM