Filter
Top Products
EN 55
Menu operations
• When [X] has not been set, [ALARM CLOCK] is not available.
• When [SILENT MODE] is set to [ON], the alarm will not sound.
• When [DUALTIME] is set to [ON], the alarm sounds according to the dual time date and time
setting.
Setting an alarm
DUALTIME ....................................................
Setting the date and time in another time zone
OFF Switches to the date and time set in [X]. Pictures are recorded with
the date and time set in [X].
ON Switches to the date and time set in [DUALTIME]. When setting the
dual time, select [ON], and then set the time. Pictures are recorded with
the date and time set in [DUALTIME].
• The date format is the same as that set with [X].
• The first two digits of the [Y] are fixed.
• The time is displayed in the 24-hour format.
ALARM CLOCK .....................................................................................
Setting alarms
OFF No alarm is set or alarm is canceled.
ONE TIME Alarm is activated once. After the alarm goes off, the setting is
canceled.
DAILY Alarm is activated daily at the set time.
• Select [ONE TIME] or [DAILY], and set the alarm time.
• You can set snooze or alarm sounds and volume.
TIME Sets the alarm time.
SNOOZE OFF No snooze is set.
ON Alarm is activated every 5 minutes, up to 7 times.
SOUND TYPE 1 / 2 / 3
VOLUME LOW / HIGH
2008 08 26 12 30
Y M D TIME
MENU
CANCEL
DUALTIME
m: Exits a setting.
SNOOZE
ALARM CLOCK
VOLUME
SOUND TYPE
TIME
MENU
EXIT SET
OK
d4364_e_00_unified_bookfile.book Page 55 Friday, December 28, 2007 4:06 PM