Filter
Top Products
Preparation
107
Preparation: Power Supply
Preparation
A battery pack or an external DC power supply can be used as the unit’s power supply.
Battery packs from the following manufacturers can be used:
Anton/Bauer
IDX
PACO
Sony
The type of the battery can be checked or changed through
the menu screen on the viewfinder or on the monitor.
Pressing the MODE CHECK button on the side of the unit
displays the current type of the battery in the upper right
corner of the viewfinder display.
Navigate the menu to open the <BATTERY/P2CARD>
screen from the MAIN OPERATION page. Then, through
the BATTERY SELECT menu option, you can check and
change the battery type.
Notes
Other batteries may be used by changing the menu
setting, but system compatibility is not guaranteed.
Charge the battery pack with the battery charger before
using it. (Please refer to the battery charger’s instruction
manual for information about charging.)
Power Supply
Using a Battery Pack
AJ-HPX2700G-VQT1V27_eng.book 107 ページ ２００８年９月２日 火曜日 午後５時４３分