Panasonic AJ-P2C004HG Camera Accessories User Manual


 
36
Recording and Playback: PRE RECORDING function
The internal memory of your unit is capable of storing
several seconds of video and sound data coming from the
camera. This capability can be used to record video and
sound several seconds before either the REC START/STOP
button or VTR button at the lens is pressed to start
recording. To use this function, the menu option PRE REC
MODE must be set to “ON”. The storage duration of the
internal memory can be set from the menu option PRE REC
TIME. PRE REC MODE and PRE REC TIME menu options
can be found in the <REC FUNCTION> screen on the
SYSTEM SETTING page.
The function of the menu option PRE REC MODE may be
assigned to a desired user button by using any one of the
menu options USER MAIN SW, USER1 SW, USER2 SW,
MARKER SEL, or TEXT MEMO SW.
These options can be found in the <USER SW> screen on
the CAM OPERATION page.
The following is the option for PRE REC TIME.
1-8SEC (for AVC-Intra100/50 or DVCPRO HD)
Specify the duration for which data may be recorded before
either the REC START/STOP button or VTR button at the
lens is pressed.
Notes
“P-REC” indication when the PRE REC MODE menu
option is set to “OFF”
After recording is stopped, the “P-REC” indication remains
displayed until all video and sound are recorded on the P2
card, even if the PRE REC MODE menu option is set to
“OFF”. For details of the “P-REC” display, refer to
[28. INTERVAL REC/PRE RECORDING indication/SD
memory card remaining free space] (page 81) in
[Viewfinder Status Indication Layout].
Immediately after the power is turned on, the menu option
PRE REC TIME is selected and/or the storage duration is
changed, the content in internal memory will be undefined.
In these situations, the video or sound will not be recorded
for the duration specified, even if either the REC START/
STOP button or VTR button at the lens is pressed to start
recording.
A P2 card that has been just inserted takes some time to
recognize. In this situation, video or sound may not be
recorded for the duration specified, even if either the REC
START/STOP button or VTR button at the lens is pressed
to start a recording.
The internal memory does not store video or sound when
a playback or recording review is being performed. For
this reason, no video or sound can be recorded during
such operation.
When recording starts, the time code (TCG) display may
not update until the unit recognizes the P2 card.
During native VFR recording and INTERVAL REC
operation, the PRE RECORDING is not available.
PRE RECORDING function
A
A
B
B
C
Recording starts
Recording pauses
Real-time video/
sound
Specified PRE REC duration
Content on P2 card
New clip
Previous clip
AJ-HPX2700G-VQT1V27_eng.book 36 ページ 2008年9月2日 火曜日 午後5時43分