Filter
Top Products
162
Menu: Menu Configuration
USER MENU:USER MENU is factory-set. The menu can be
configured to suit your preferences by
specifying each option according to your
purposes and frequency of use, through the
<USER MENU SELECT> screen, which is
accessible from the MAIN MENU page.
For more information, see [Selecting Options
for USER MENU] (page 164).
To display USER MENU, press the MENU
button.
MAIN MENU: Allows you to set all options on the settings
menu.
This menu has a category-by-category
structure, layered according to purposes and
frequency of use.
To display MAIN MENU, press the MENU
button for 3 seconds or longer.
SYSTEM SETTING:
This option is used to specify recording signal,
recording system, etc.
PAINT: This option is used to fine-adjust images while
monitoring the output waveform of the
camera, using the waveform monitor.
Normally, this adjustment requires assistance
from a video engineer.
This option may be performed by an external
remote control. However, it is valid when the
unit is used as a stand-alone device.
VF: Used to select the information items to be
displayed in the viewfinder screen.
CAM OPERATION:
Used to change settings according to the
conditions for the subject.
MAIN OPERATION:
Used to specify recording-related items, such
as audio settings, time code, battery and P2
card remaining amounts.
FILE: Used to specify file-related items such as SD
memory card reading/writing and lens file
settings.
MAINTENANCE:
Used to specify maintenance-related items.
USER MENU SELECT:
Used to edit USER MENU.
OPTION MENU:
Provides options which may be needed if
functions are added in the future.
To display OPTION MENU, hold down the
LIGHT button and press the MENU button.
For more information, contact your distributor.
a. LIGHT button
b. Jog dial button
c. MENU button
d. SHOT MARKER/MENU CANCEL button
a
b
c
d
AJ-HPX2700G-VQT1V27_eng.book 162 ページ ２００８年９月２日 火曜日 午後５時４３分