Panasonic AK-HCU200PS Camera Accessories User Manual


 
11
Setting menu items
TOP MENU
This is the first screen displayed when you hold down the MENU button
Select one of the menus
TOP MENU
OPERATION
MAINTENANCE
OPERATION
Select this to open the OPERATION menu screen
MAINTENANCE
Select this to open the MAINTENANCE menu screen
OPERATION menu
This is the selection screen for the OPERATION menu
Moving the cursor to the “OPERATION” menu title and then pressing the
SELECT dial redisplays “TOP MENU”
OPERATION
SETTING1
SETTING2
HD/SD PHASE
BAR ID
INCOM/MIC
SETTING1
Select this to display the SETTING1 screen
SETTING2
Select this to display the SETTING2 screen
HD/SD PHASE
Select this to display the HD/SD PHASE screen
BAR ID
Select this to display the BAR ID screen
INCOM/MIC
Select this to display the INCOM/MIC screen
SETTING1 Screen
This is the selection screen for the SETTING1 menu
Moving the cursor to the “SETTING1” menu title and then pressing the
SELECT dial redisplays the OPERATION menu one level up
SETTING1
CCU MODE 1080/59.94i
SDI RETURN1 HD
SDI RETURN2 HD
SDI OUTPUT1&2 HD
SDI OUTPUT3&4 HD
NORMAL/PM PM
COMPOSITE
NORMAL/PM PM
indicates the factory default setting
Item
Setting
value
Remarks
CCU MODE
5994 Hz:
1080/5994i
1080/50i
Set the format of the signal to be output
from the unit
50 Hz:
1080/5994i
1080/50i
SDI RETURN1
HD
SD
Set the format of the return signal to be
input to [HD/SD SDI 1] of the RETURN
IN connectors
SDI RETURN2
HD
SD
Set the format of the return signal to be
input to [HD/SD SDI 2] of the RETURN
IN connectors
SDI OUTPUT1&2
HD
SD
Set the format of the signals to be
output from [1] and [2] of the HD/SD
SDI OUT connectors
SDI OUTPUT3&4
HD
SD
Set the format of the signals to be
output from [3/PM] and [4/PM] of the
HD/SD SDI OUT connectors
SDI OUTPUT3&4
NORMAL/PM
NORMAL
PM
Set the signal to be output from [3/PM]
and [4/PM] of the HD/SD SDI OUT
connectors
NORMAL:
Output the main line images
PM:
Output the picture monitor images
COMPOSITE
NORMAL/PM
NORMAL
PM
Set the signal to be output from
[OUT/PM] of the VBS connectors
NORMAL:
Output the main line images
PM:
Output the picture monitor images
When the SDI OUTPUT3&4 NORMAL/PM item and COMPOSITE
NORMAL/PM item are set to “NORMAL”, the menus and statuses will
not be able to be displayed because the picture monitor images will
not be output
When one of items is set to “NORMAL”, the other one is set to “PM”
as both of the items cannot be set to “NORMAL”