Panasonic AK-HCU200PS Camera Accessories User Manual


 
3
Picture monitor (PM) displays
Switching the display
Display the camera statuses, warnings, and other information on the
picture monitor using the operation panel of the ROP
Press the CHARA button of the ROP to display the desired information
The camera statuses, warnings, and other information are cleared when
the CHARA button of the ROP is held down
CHARA button
ROP: AK-HRP200
Transition of displays
When trouble is detected, warning information is automatically displayed on the picture monitor
Even if status information or operation information is already displayed on the picture monitor when trouble is detected, priority is given to the display of
the warning information
The descending sequence of priority for the displays on the picture monitor is as follows: WARNING displays → AUTO displays → STATUS displays →
REMOTE OPERATION menu displays → CCU menu displays → OPERATION displays → no display
When the warning information with the highest priority disappears, the warning information with the next highest priority appears
Sequence of
priority
What is displayed on the
screen
ROP connected
Yes No
Higher
Lower
WARNING displays Warnings are automatically displayed when
trouble is detected
Self-recovery
The warning displays are cleared
Press the CHARA button of the ROP
The display switches to the status screen (IRIS
or status display)
Hold down the CHARA button of the ROP
The warning displays are cleared
Warnings are automatically displayed when
trouble is detected
Self-recovery
The warning displays are cleared
Press the SELECT dial on the unit
When the transition source screen is displayed:
The display switches to the transition source
screen
When the transition source screen is not
displayed:
The warning displays are cleared
AUTO displays Automatically displayed Automatically displayed
STATUS displays Perform display operations using the CHARA
button of the ROP
Press the CHARA button of the ROP
No display → (WARNING) → IRIS → status
displays → Status1 → Status2 → Status3 →
Status4 → Status1 
Hold down the CHARA button of the ROP
The status displays end
REMOTE OPERATION menu
displays
When a menu of the CCU
(this unit) is displayed while
the REMOTE OPERATION
menu is displayed, the
REMOTE OPERATION menu
disappears
Display by pressing the CHARA button of the
ROP
Operations using the SELECT dial of the ROP
CCU menu displays
When the REMOTE
OPERATION menu is
displayed while a menu of the
CCU (this unit) is displayed,
the menu of the CCU (this
unit) disappears
Display by pressing the MENU button on the unit
Operations using the SELECT dial on the unit
Display by pressing the MENU button on the unit
Operations using the SELECT dial on the unit
OPERATION displays Automatically displayed Automatically displayed
No display —— ——