Panasonic AK-HCU200PS Camera Accessories User Manual


 
22
START UP Screen
This menu is used to set the control that is performed when the unit’s
power is turned on
Moving the cursor to the “START UP” menu title and then pressing the
SELECT dial redisplays the MAINTENANCE menu one level up
START UP
CAM POWER REMOTE
VF POWER REMOTE
indicates the factory default setting
Item
Setting
value
Remarks
CAM POWER
OFF
ON
REMOTE
Set the control of the camera’s power
that is to be performed when the unit’s
power is turned on
OFF:
The camera’s power will not come on
even when the unit’s power is turned
on In this case, “HEAD POWER”
must be set to ON on the operation
panel of the ROP
ON:
The camera’s power will come on
when the unit’s power is turned on
REMOTE:
Starts up in accordance with the
“HEAD POWER” state that was set
with the ROP last time
VF POWER
OFF
ON
REMOTE
Set the control of the viewfinder’s power
that is performed when the unit’s power
is turned on
OFF:
The viewfinder’s power will not come
on even when the unit’s power is
turned on In this case, “VF POWER”
must be set to ON on the operation
panel of the ROP
ON:
When the viewfinder’s POWER
switch is ON, turning on the power of
this unit also turns on the power of
the viewfinder
REMOTE:
Starts up in accordance with the “VF
POWER” state that was set with the
ROP last time
ANALOG GAIN Screen
This menu is used to set the analog signal levels
Moving the cursor to the “ANALOG GAIN” menu title and then pressing
the SELECT dial redisplays the MAINTENANCE menu one level up
ANALOG GAIN
COMPOSITE –50
indicates the factory default setting
Item
Setting
value
Remarks
COMPOSITE
–50
50
Factory setting
Set the video level of the analog
composite signal to be output from
[OUT/PM] of the VBS connectors
(Variable range: ±8 IRE or more is
possible)
ND NAME Screen
This menu is used to set the names of the ND filters
The names set here are displayed for the statuses on the picture
monitor
Names consisting of up to 4 characters can be set for ND FILTER1
NAME to ND FILTER4 NAME
Moving the cursor to the “ND NAME” menu title and then pressing the
SELECT dial redisplays the MAINTENANCE menu one level up
ND NAME
ND FILTER1 NAME 1
ND FILTER2 NAME 2
ND FILTER3 NAME 3
ND FILTER4 NAME 4
indicates the factory default setting
Item
Setting
value
Remarks
ND FILTER1
NAME
1
Max 4
characters
Set the name of ND filter 1
ND FILTER2
NAME
2
Max 4
characters
Set the name of ND filter 2
ND FILTER3
NAME
3
Max 4
characters
Set the name of ND filter 3
ND FILTER4
NAME
4
Max 4
characters
Set the name of ND filter 4
Characters which can be used:
Alphanumeric characters
Spaces
`
! " # % & ' ( )
+ , -  / : ; < = > ? @ [ ] _ ~
Setting menu items (Continued)