Filter
Top Products
13
HD/SD PHASE Screen
This menu is used for the HD signal and SD signal phase adjustments
Moving the cursor to the “HD/SD PHASE” menu title and then pressing
the SELECT dial redisplays the OPERATION menu one level up
HD/SD PHASE
HD H PHASE 0
SD H PHASE 0
SD-HD V 0H
indicates the factory default setting
Item
Setting
value
Remarks
HD H PHASE
5994 Hz:
–1099
│
0
│
1099
Adjust the horizontal sync phase of
HDTV output in respect to the sync
signals of the system
50 Hz:
–1319
│
0
│
1319
SD H PHASE
5994 Hz:
–857
│
0
│
857
Adjust the horizontal sync phase of
SDTV output in respect to the sync
signals of the system
50 Hz:
–863
│
0
│
863
SD-HD V
0H
ADVANCE
0H
_
SD
_
DLAY
Set the vertical phase of the HDTV
output in relation to the SDTV output
0H:
Sets the vertical phase to the same
phase
ADVANCE:
When the field frequency is 5994 Hz,
the phase advance is 90H
When the field frequency is 50 Hz,
the phase advance is 75H
0H_SD_DLAY:
The SDTV signals are delayed and
set in-phase with the HDTV signals
When the setting of this item is set
to “0H” or “ADVANCE” while the field
frequency is 50 Hz, images in SD
format are delayed by 1 frame + 75
lines only when letterbox is selected
for DOWNCONVERT MODE*
For the relationship with the sync
phase, refer to pages 14 to 19
*: The DOWNCONVERT MODE setting can be configured by operating
the REMOTE OPERATION menu with the ROP
For details, refer to Operating Instructions <Operations and Settings>
of AK-HRP200
Setting menu items (Continued)