Panasonic AK-HCU200PS Camera Accessories User Manual


 
26
Web settings
You can connect the unit and a computer, and configure various settings
from the Web browser screen
Use a LAN cable (crossover cable) to directly connect the unit’s LAN
connector for computer connections and the computer
Set an IP address for the computer within the private address range
while ensuring that it is different from the address of the unit Set the
subnet mask to the same address as the unit
Network settings of the unit (default settings)
IP address: 192168020
Subnet mask: 2552552550
Port number: 80
Default gateway: 19216801
Note
Menu operations
Start the Web browser, and enter “http://192168020” in the [Address]
box of the Web browser
If the IP address is changed, the URL will also be different
If this is the case, use the new IP address in the URL (http://new IP
address/)
Moving from one menu to another
To move from one menu to another, select the desired menu on the left
of the screen
This is equivalent to “TOP MENU” displayed on the
picture monitor
When either “OPERATION” or “MAINTENANCE” is
selected above, the corresponding menu items are
displayed here
In the example shown, the OPERATION menu items
are displayed
The setting screen corresponding to the menu item
selected here is displayed on the right
When using Internet Explorer, do not use [ Back] or [ Next]
Displaying the setting screens
Select a menu item on the left of the screen to display the setting screen
corresponding to that item