Panasonic AK-HCU200PS Camera Accessories User Manual


 
31
INCOM/MIC Screen
This menu is used for the unit’s intercom settings
Configure the camera’s intercom setting on the camera
indicates the factory default setting
Item
Setting
value
Remarks
4W/RTS
IN LEVEL
–400dB
0dB
200dB
Set the input level for the intercom
(4-WIRE and RTS) signal
(05dB increments)
4W/RTS
OUT LEVEL
–400dB
0dB
200dB
Set the output level for the intercom
(4-WIRE and RTS) signal
(05dB increments)
RTS CANCEL –400dB
315dB
Set the noise canceling level for the
engineering intercom (RTS system)
(05dB increments)
GAIN PGM
0dB
20dB
Set the gain for the PGM sound
MIC LEVEL MIC1
–400dB
0dB
200dB
Finely adjust the level of output from the
MIC OUT 1 connector
(05dB increments)
MIC LEVEL MIC2
–400dB
0dB
200dB
Finely adjust the level of output from the
MIC OUT 2 connector
(05dB increments)
CM/DM
CM
DM
Use this to select the type of intercom
microphone (carbon microphone or
dynamic microphone) to be connected
to the unit
CM: Carbon microphone
DM: Dynamic microphone
CCU INCOM MIC
–400dB
0dB
120dB
Use this to set the level of the unit’s
intercom microphones for regular use
(05dB increments)
CCU SIDE TONE
–400dB
–6dB
00dB
Use this to set the side tone level of the
unit’s intercom for regular use
(05dB increments)
Items when the MAINTENANCE menu is
selected
Display the START UP screen
Display the ANALOG GAIN screen
Display the ND NAME screen
Display the NETWORK screen
Display the VERSION screen
Display the PM VIEW SETTING screen
Display the PM OPERATION STATUS screen
Display the SYSTEM screen
Web settings (Continued)