Panasonic AK-HCU200PS Camera Accessories User Manual


 
33
NETWORK Screen
This screen displays the network addresses
On this screen, the addresses cannot be changed
Item Remarks
IP ADDRESS Displays the IP address
SUBNETMASK Displays the subnet mask
DEFAULT
GATEWAY
Displays the default gateway
PORT Displays the port number
MAC ADDRESS Displays the MAC address
VERSION Screen
This menu is used to display the version information for the application
software and FPGA
Item Remarks
SOFTWARE Displays the version of the software installed on the
unit
HARDWARE
FPGA1
Displays the versions of the programs installed on the
unit
HARDWARE
FPGA2
HARDWARE
FPGA3
PM VIEW SETTING Screen
This menu is used to set ON or OFF for the items (IRIS, status display)
to display on the picture monitor
indicates the factory default setting
Item
Setting
value
Remarks
CAMERA NO
ON
OFF
Set the display of the camera number
CAM MODE
ON
OFF
Set the display of the format of the
signal output from the camera
SCENE FILE NO
ON
OFF
Set the display of the scene file number
SHUTTER
ON
OFF
Set the display of the shutter speed
ND FILTER
ON
OFF
Set the display of the ND filter status
GAIN
ON
OFF
Set the display of the gain
EXTENDER INFO
ON
OFF
Set the display of the lens extender
status
IRIS
ON
OFF
Set the display of the IRIS f-value
IRIS LEVEL
ON
OFF
Set the display of the IRIS level bar
When OFF is set, the IRIS display
screen does not appear on the
picture monitor
Web settings (Continued)