Filter
Top Products
-55-
2. Zebra Level Setting [Level: 70% to 110%]
This enables the zebra pattern to be displayed so
that it will provide as a general guideline for the lumi-
nance level.
❈ It can be set when “ON” has been selected as the
zebra indicator setting (<-1).
3.
Safety Zone Setting [Safety Zone: OFF, 1, 2, 3, 4, 5]
This is used to select the type of safety zone which is
displayed on the viewfinder. A safety zone is not dis-
played when “OFF” is selected.
❈ The safety zone and center marker indicate elec-
trical positions and, as such, they may be at vari-
ance with their optical positions.
4. EVF Output Setting [EVF Output: Y, CVBS]
This is used to set the signals to be output to the
viewfinder.
Y: The luminance signal is output to the viewfinder.
CVBS: The color signals are output to the viewfinder.
❈ When “CVBS” has been selected as the setting,
the zebra pattern will not be displayed on the
viewfinder.
5. Auto Focus [Auto Focus: OFF, ON]
This enables auto focus ON and OFF to be controlled
when the zoom/focus cable of a Canon AF lens has
been connected to the ZOOM/FOCUS connector of
the optional card.
1
54
3
2
The inside and outside frames denote safety zones
of about 90% and about 95%, respectively.