Filter
Top Products
– 128 –
Item
HUMID OPE
26P CONTROL
REC START
TC MODE
UB MODE
PAUSE TIMER
BATTERY SEL
Variable
range
ON
OFF
OFF
BOTH
ON
ALL
NORMAL
DF
NDF
USER
DATE
TIME
EXT
GPSF
10
20
30
60
NiCd12
NiCd13
NiCd14
IDXL-40
L-60
L-90
ANTON-
D
IDX-D
Remarks
This selects the VTR operation when
condensation has formed.
ON: Operation continues as usual.
OFF: All operations are disabled
except for the POWER switch and
EJECT button.
This selects 26P remote control.
OFF: Unit only (no 26P control).
BOTH: Unit and 26P remote control
(tally LED displays unit’s REC status).
ON: 26P remote control only (tally
LED displays 26P VTR’s REC status).
This selects in what VTR mode REC is
to be acknowledged when the VTR is
started or stopped.
ALL: REC is acknowledged in any
VTR mode.
NORMAL: REC is acknowledged only
in the STOP (power save) mode and
REC PAUSE mode.
This sets DF or NDF for the time code.
DF: Drop frame mode
NDF: Non-drop frame mode
This selects how LTC UB is to be
used.
USER: User setting (fixed setting)
DATE: For year/month/day/hour real-
time operations.
TIME: For hour/minute/second real-
time operations.
EXT: The UBG value is slave-locked
when an external TC signal has been
input. (The user setting is used when
there is no external input.)
(GPS): GPS is placed on UB when
the Picture Link function is used.
This selects the time for which the
REC/PAUSE status is to be
maintained.
10/20/30/60: Status is to be held for
10, 20, 30 or 60 minutes.
This selects the battery type.
NiCd12: When a 12V NiCd battery is used
NiCd13: When a 13V NiCd battery is used
NiCd14: When a 14V NiCd battery is used
IDXL-40: When the L-40 battery made
by IDX is used
L-60/L-90: When a battery made by
Sony is used
ANTON-D: When a battery made by
Anton Bauer is used
IDX-D: When a battery made by IDX
is used digitally
VF
display
ENG
ENG
ENG
ENG
ENG
ENG
ENG
MAIN Menu Screen 2 of 4 (SUB menus)
VTR FUNCTION screen
The VTR’s functions are set on this screen.
{
VTR FUNCT I ON
HUM I D OPE
:
:
:
:
:
:
:
:
:
:
OFF
OFF
OFF
OFF
26P CONTROL
REC START NORMAL
TC MODE
MODE
DF
UB USER
PAUSE T IMER 30
BATTERY SEL Ni Cd12
TCG
TCG
VF DI SP
SET HOLD
F IRST REC TC REGEN
¢
|
FThis is displayed when the Picture
Link adaptor board (AJ-YAP900,
optional accessory) has been
installed.
|Notes{
¡Set SW201 on the CAM ENC
board and SW1 (26PIN) on the
CAM SYNC board to ON when the
26P remote control function is to
be used.
¡Change the time on the TIME/
DATE menu screen when the
REAL setting is to be used for the
UB MODE item.
The underlining in the variable range
column indicates the setting in the
preset mode.