Filter
Top Products
– 129 –
Item
TCG VF DISP
TCG SET HOLD
FIRST REC TC
Variable
range
ON
OFF
ON
OFF
REGEN
PRESET
VF
display
ENG
ENG
ENG
Remarks
This selects ON or OFF for time code
display in the viewfinder.
ON: The time code is displayed.
OFF: The time code is not displayed.
This selects the TCG operation when
operation is performed in the following
sequence: TCG SET>power
OFF>power ON>REC.
ON: The fact that TCG SET has been
selected is stored in the memory when
the power is switched off, and
regeneration is not performed.
OFF: The fact that TCG SET has
been selected is not stored in the
memory when the power is switched
off, and regeneration is performed.
This sets the TC REGEN mode when
recording starts.
REGEN: Regeneration is performed in
the time code on the tape.
PRESET: Regeneration is not
performed in the time code on the
tape.
However, when the mode is
transferred from REC/PAUSE to REC,
regeneration is forcibly performed.
The underlining in the variable range column indicates the setting in the preset mode.
USER menu: The USER menu appears when the MENU switch is set to SET.
ENG menu: The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
held down together.
MAIN Menu Screen 2 of 4 (SUB menus)
{
VTR FUNCT I ON
HUM I D OPE
:
:
:
:
:
:
:
:
:
:
OFF
OFF
OFF
OFF
26P CONTROL
REC START NORMAL
TC MODE
MODE
DF
UB USER
PAUSE T IMER 30
BATTERY SEL Ni Cd12
TCG
TCG
VF DI SP
SET HOLD
F IRST REC TC REGEN
¢
|