Filter
Top Products
–90–
Setup Card Operations
Writing set data to cards
1 Set the MENU SET/OFF switch to the SET position while the SHIFT/ITEM button and UP
button are held down together.
2 Press the PAGE button to display the MAIN menu screen 3 of 4.
3 Press the SHIFT/ITEM button to move the cursor to the “CARD READ/WRITE” position.
4 Press the UP or DOWN button to open the CARD READ/WRITE page.
5 Press the SHIFT/ITEM button repeatedly to move the cursor to the WRITE position.
6 A menu shown below appears when the UP (or DOWN) button is pressed.
7 Press the UP button to write data on the set up card. When writing is complete, the message
shown below appears.
8 When menu operations have been completed, return the MENU SET/OFF switch to OFF.
The setting menu disappears from the viewfinder screen and the displays indicating the unit’s
current status appear at the top and bottom of the viewfinder screen.
{
CARD
CARD
READ
READ
/
W
RITE
W
RITE
READ
SELECT
SELECT
1
1
CONF I G
USER DATA
¢
|
{
CARD
CARD
READ
READ
/
W
RITE
?
(
Y
:
UP . N
:
W
RITE
W
RITE
READ
DO
W
N
)
SELECT
SELECT
1
1
CONF I G
USER DATA
|
¢
{
CARD
CARD
READ
READ
/
W
RITE
W
RITE
W
RITE
READ
SELECT
SELECT
1
1
CON
OK
FIG
USER DATA
|
¢