Panasonic PV-GS70 Camcorder User Manual


 
90
ªPlayback Digital Effect Functions
(l 48)
Revised signals of images to which digital effects
are added during playback cannot be output from
the DV Terminal or Digital Still Picture Terminal.
You cannot use the Wipe Function or Mix Function
while playing back the non-recorded portion of
tape.
Multi-Picture Mode (VCR Mode) (l 49)
The quality of Multi images deteriorates slightly.
Playback multi-mode screens cannot be output
through DV Terminal or Digital Still Picture
Terminal.
If there is input from the DV Terminal, a multi
screen cannot be created.
When signals are input from S-Video Input/Output
Jack or Audio-Video Input/Output Jack, a multi
screen cannot be re-displayed.
Signals input from S-Video Input/Output Jack or
Audio-Video Input/Output Jack cannot be
displayed on a multi screen.
If you switch the Palmcorder from the Index
Multi-Picture Mode over to the Camera Mode, the
setting of [SCAN MODE] on the
[MULTI-PICTURES] Sub-Menu of the
[CAMERA FUNCTIONS] Main-Menu is
automatically set to [STROBE].
ªAudio Dubbing (l 51)
The blank section of a tape cannot be dubbed.
Sounds sent through the DV Terminal cannot be
dubbed.
If a tape has a non-recorded portion when the tape
is dubbed, images and sounds may be disturbed
when this portion of the tape is played back.
If you set the tape counter back to 0 at the position
where you want to stop Audio Dubbing so as to
make it possible to use the Memory Stop Function
(l 98), Audio Dubbing is terminated automatically
when the tape reaches this position.
In the case of importing data recorded with Audio
Dubbing to a Computer using the Computer’s
software program, only the original sound (ST1)
may be imported, depending on the software
program.
Microphone Jack
When audio dubbing is carried out through an
external microphone or audio equipment, connect it
to the [MIC] Jack. In this case, the built-in
microphone of the Palmcorder will be turned off.
ªRecording on a Card (l 52 – 56)
The following functions are disabled:
Image Stabilizer
(l 33)
Cinema function
(l 33)
MagicPix functions
(l 34)
Do not touch the connector terminal located on the
back of the card.
Wide images cannot be recorded on the Memory
Card.
A card that was formatted with this Palmcorder
may not be usable in other equipment. If this
happens, please format the card with the
equipment with which the card is to be used.
Before proceeding with this operation, we suggest
that you take the precautionary measure of storing
important images in your personal computer.
In the Card PhotoShot mode, the Palmcorder
automatically saves the file numbers (100-0012,
etc.) along with the pictures. A file number is
recorded with each picture as a running number.
If the [TAPE/CARD/CARD MODE] Selector is set
to [CARD], the Palmcorder is automatically turned
off when you leave it for about 5 minutes without
performing any PhotoShot recording.
When the [TAPE/CARD/CARD MODE] Selector is
set to [CARD], you cannot record to the Tape.
During automatic copying tape pictures onto a
Card, the number of pictures that can still be
recorded on the Card is displayed. When it
becomes [0], the Tape is set to the Recording
Pause Mode.
Pictures with wide-screen format signals cannot
be copied.
Card PhotoShot (l 53)
Sound cannot be recorded.
The Progressive Function is set to [ON].
Even if the [SHTR EFFECT] is set to [ON], the
Shutter Effect cannot be recorded on the picture.
The shutter speed ranges from 1/30-1/500.
When the color of the screen changes or blurs,
adjust the shutter speed manually to 1/60 or 1/100.
Mega-pixel images cannot be recorded on a
cassette as a Mega-pixel picture.
A Card formatted with other equipment (like a
Personal Computer) might be unusable or it might
take more time for recording. We recommend that
you use this equipment to format it.
The file format supported by this Palmcorder is
JPEG. (Not all the JPEG formatted files will be
played back.)
It may not be possible to play back a mega-pixel
still-picture recorded by this Palmcorder with
another Palmcorder.
PV-GS70P.book 90 ページ 2003年3月14日 金曜日 午前9時20分