Filter
Top Products
Preparation
13
Inserting/Removing the Battery
•Check that the camera is turned off and
that the lens is retracted.
•Close the flash.
1 Slide the card/battery door to
open it.
•Please be sure to use genuine
Panasonic batteries (CGA-S002E).
2 Insert:
Insert the charged battery until it
clicks.
Remove:
Slide the lock 1 to remove the
battery.
3 1 Close the card/battery door.
2 Slide the card/battery door to
the end and then close it firmly.
•If you will not be using the camera for a
long time, remove the battery.
•When fully charged battery has been
inserted for more than 24 hours, the clock
setting is stored (in the camera) for at
least 3 months even if the battery is
removed. (The storing may be shorter if
the battery is not charged sufficiently.)
If more than 3 months has passed, the
clock setting will be lost. In this case, set
the clock again. (P20)
•Do not remove the card and the battery
while the card is being accessed. The
data on the card may be damaged.
•The supplied battery is designed only
for this camera. Do not use it with any
other equipment.
FZ3-GN.book 13 ページ ２００４年７月２７日 火曜日 午前９時２５分