Filter
Top Products
Connecting to a PC or Printer
93
Connecting to a PC
•If you use Windows 98/98SE, install the
USB driver and then connect it to the
computer.
•When using Windows Me/2000/XP, Mac
OS 9.x and Mac OS X, you do not have to
install the USB driver.
A: USB connection cable (supplied)
B: AC adaptor (DMW-CAC1; optional)
1 Turn the camera on and set the
[USB MODE] according to the OS
you use.
•Set to [PC] or [PictBridge (PTP)]. Refer
to “Before Connecting with USB
Connection Cable” on page 91.
•If [USB MODE] is set to [PictBridge
(PTP)] while Windows XP or Mac OS X
is used, it is connected as PTP.
2 Connect the camera to a PC via
the USB connection cable A
(supplied).
•Connect the USB connection cable with
the [ ] mark facing you.
•Hold C and then insert or pull the USB
connection cable straight.
Depending on the USB mode setting, the
indications on the screen may vary. Refer
to page 94.
FZ3-GN.book 93 ページ ２００４年７月２７日 火曜日 午前９時２５分