Filter
Top Products
Others
99
Others
Using the MC Protector/ND Filter
The MC protector (DMW-LMC55; optional)
is a transparent filter which affects neither
the colours nor the amount of light, so it
can always be used to protect the camera’s
lens.
The ND filter (DMW-LND55; optional)
reduces the amount of light to
approximately 1/8th (equal to adjusting the
aperture value 3 increments) without
affecting the colour balance.
1 Remove the lens cap.
2 Attach the lens hood adaptor.
(P18)
3 Attach the MC protector 1 or the
ND filter
2.
•The lens cap supplied with the camera
cannot be attached to the MC protector or
the ND filter.
•You cannot attach the MC protector and
the ND filter at the same time.
•When taking pictures with the flash using
the MC protector or ND filter, vignetting
effect may occur.
•If the MC protector/ND filter are dropped,
they may be destroyed. Be careful not to
drop them when attaching them to the
camera.
•MCu“Multi-coated”
NDu“Neutral Density”
FZ3-GN.book 99 ページ ２００４年７月２７日 火曜日 午前９時２５分