Filter
Top Products
Preparation
17
Attaching the Lens Cap/Strap
∫ Lens Cap
1 Pass the string through the hole
on the lens cap.
2 Pass the string through the hole
on the camera.
3 Attach the lens cap.
∫ Strap
1 Pass the strap through the hole at
the Strap Eyelet.
2 Pass the strap through the
stopper and fasten the strap.
A: Pull the strap 2 cm or more.
•Attach the strap to the other side of the
camera being careful not to twist it.
•Check that the strap is firmly attached to
the camera.
•Attach the strap so that you can see
“L
UMIX” logo.
•When you turn the camera off, carry the camera or play back the pictures, attach the lens
cap to protect the surface of the lens.
•Detach the lens cap before turning on the camera in the recording mode.
•When the mode dial is set to one of the recording modes and the camera is turned on
with the lens cap attached, the message [REMOVE LENS CAP AND PRESS 1
BUTTON] appears. Press 1 button after detaching the lens cap.
•Be careful not to lose the lens cap.
FZ3-GN.book 17 ページ ２００４年７月２７日 火曜日 午前９時２５分