Recording pictures (basic)
44
Taking Pictures using Auto Bracket
In this mode, 3 pictures are automatically
recorded by each press of the shutter
button according to the compensation
range of the exposure.
You can select the desired exposure
among the 3 types of pictures.
1 Press 3 several times until
[ AUTO BRACKET] appears
and then set the compensation
range of the exposure.
•You can select the exposure from
j1EV to i1 EV in steps of 1/3 EV.
•When you do not use auto bracket,
select [OFF].
•When setting the auto bracket, the auto
bracket icon appears on the lower left of
the screen.
•When taking pictures using auto bracket
after the exposure compensation, the
pictures are based on the compensated
exposure.
When the exposure is compensated, the
compensated exposure value appears on
the lower left of the screen.
•When the flash is activated, you can take
only 1 picture.
•When setting auto bracket, you cannot
take a picture of which quality is [TIFF] or
a picture with audio.
•When setting auto bracket and the burst
mode simultaneously, auto bracket will be
performed.
•The exposure may not be compensated
with auto bracket depending on the
brightness of the subject.
AUTO BRACKET
SELECT
EXIT
FZ3-GN.book 44 ページ 2004年7月27日 火曜日 午前9時25分