Filter
Top Products
Preparation
14
Inserting/Removing the Card
•Check that the camera is turned off and
that the lens is retracted.
•Close the flash.
1 Slide the card/battery door to
open it.
•The card and the data may be
damaged if it is inserted or removed
while the camera is on.
•We recommend using Panasonic’s SD
Memory Card. (Use only the genuine
SD card with SD Logo.)
2 Insert:
Insert the card with the label
facing the front of the camera
until it clicks.
Remove:
Push the card until it clicks, then
pull the card out upright.
•Check the direction of the card.
•Do not touch the connection terminals
on the back side of the card.
•The card may be damaged if it is not
fully inserted.
3 1 Close the card/battery door.
2 Slide the card/battery door to
the end and then close it firmly.
•If the card/battery door cannot be
completely closed, remove the card and
insert it again.
FZ3-GN.book 14 ページ ２００４年７月２７日 火曜日 午前９時２５分