Filter
Top Products
Preparation
20
Setting Date/Time (Clock Set)
∫ Initial setting
The clock is not set when the camera is
shipped. When you turn the camera on, the
following screen appears.
•When pressing the [MENU] button, the
screen shown in step 2 appears.
•The screen disappears in about
5 seconds. Start from step 1.
1 Select [CLOCK SET] from the
[SETUP] menu. (P22)
2 Set date and time.
•2/1: Select the desired item.
•3/4: Set date and time.
3 Select [D/M/Y], [M/D/Y] or [Y/M/D].
•Close the menu by pressing the
[MENU] button 2 times after finishing
the setting.
•Check if the clock setting is correct,
after turning the camera off and on.
PLEASE SET THE CLOCK
CLOCK SET
MENU
SETUP
2
/
3
LEVEL
3
MENU
VOLUME
NO.RESET
RESET
SHUTTER
CLOCK SET
SELECT
EXIT
MENU
D/M/Y
11
DEC
2004
..
10 00
:
CLOCK SET
SETSELECT
EXIT
MENU
10:00111.
DEC
.2004
D/M/Y
CLOCK SET
SETSELECT
EXIT
MENU
FZ3-GN.book 20 ページ ２００４年７月２７日 火曜日 午前９時２５分