Filter
Top Products
Basic
- 70 -
• Press the shutter button halfway or turn the camera off and on to cancel [SLEEP MODE].
• [SLEEP MODE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].
• Press any button to turn on the LCD monitor again.
• [SLEEP MODE] does not work in the following cases.
–When using the AC adaptor
–When connecting to a PC or a printer
–When recording or playing back motion pictures
–During a slide show
• If it is set to [HOLD] when the camera is set to [ ] or [ ], switching of the playback screen
display or enlargement by rotating the rear dial is possible during Auto Review.
• Regardless of the Auto Review setting, pictures will automatically be reviewed when taking
burst pictures with [SH] or [H] set, and recording with Auto Bracket. (Will not hold)
• [AUTO REVIEW] is disabled when Burst Mode is set to [M] or [L].
• When [AUTO REGISTRATION] in [FACE RECOG.] is set to [ON], [AUTO REVIEW] can only be
set to [3SEC.] or [5SEC.].
q [ECONOMY]
You can conserve the battery life by setting these menus.
Also, it will turn off the LCD monitor automatically when not in use
to prevent discharge of the battery.
p [SLEEP MODE]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[OFF]/[1MIN.]/[2MIN.]/[5MIN.]/[10MIN.]
[AUTO LCD OFF]:
The LCD monitor is automatically turned off if the camera has not
been used for the time selected on the setting.
[OFF]/[15SEC.]/[30SEC.]
o [AUTO REVIEW]
Set the length of time that the picture is displayed after taking the
still picture.
[OFF]/[1SEC.]/[3SEC.]/[5SEC.]
[HOLD]:
The pictures are displayed until shutter button is pressed halfway.