Filter
Top Products
- 79 -
Recording
Applicable modes:
Set the built-in flash to match the recording.
•
Open the flash.
1 Select [FLASH] in the [REC] Mode menu. (P62)
2 Press 3/4 to select a mode and press [MENU/SET].
•
Exit the menu after it is set.
The flash is activated twice. The interval between the first and second flash is
longer when [ ] or [ ] is set. The subject should not move until the second
flash is activated.
Switching to the appropriate flash setting
Item Description of settings
‰: Forced Flash ON
:
Forced ON/Red-Eye
Reduction
The flash is activated every time regardless of the recording conditions.
•Use this when your subject is back-lit or under fluorescent light.
: Slow Sync.
:
Slow Sync./
Red-Eye Reduction
When taking pictures against a dark background landscape, this feature
will slow the shutter speed when the flash is activated. Dark background
landscape will appear brighter.
•Use this when you take pictures of people in front of a dark
background.
•Using a slower speed can cause motion blur. Using a tripod can
enhance your photos.
Œ:
Forced Flash
OFF
The flash is not activated in any recording conditions.
•Use this when you take pictures in places where the use of the
flash is not permitted.
•Close the flash to turn it off when the built-in flash is used.