Panasonic DMC-TZ2 Digital Camera User Manual


 
Set picture quality for motion pictures (R47).
IIApplicabte modes: lt_
IISettings:
Aspect ratio _ : 13Ofps VGAI/1Ofps VGA / 3Ofps QVGA / 10fps QVGA
(P.51) _:130fps 16:91/10fps 16:9
@'30fps': smoother movement; '10fps': longer recording time
Set size of picture. Number of pictures which can be recorded depends on this setting
and on 'QUALITY' (see right). (P.92)
@Picture size setting guide
Larger picture size = Crisper picture
(lower recording capacity)
Smaller picture size = Coarser picture
(higher recording capacity)
inapplicable modes: _ I_ _ SCN1SCN2
mSettings:
ASPECT RATIO
m
Picture size
[_'_ 3072x2304 5M i-'#_'22560x1920 3M []2048xI536
2MI-:_I 1600x1200 1M [] 1280x960 0.3M []640x480
[_,3 3216x2144 4.5M[] 2568x1712 2.5M []2048xi360
[_< 3328x1872 3.5M[] 2568x1440 2M []192Oxi080
@Picture sizes for DMC-TZ2 model are as follows.
_ : 6M (2816 x 2112) ,2: None ,3 : 6M (2976 x 1984) _ : 5.5M (3072 x I728)
@Extended optical zoom (R27) can be used for picture sizes indicated with [].
@1"#-_is not displayed in the 'HIGH SENS.' scene mode (P.44) (as extended optical
zoom cannot be used).
@Mosaic effect may appear depending on subject and recording conditions.
Set compression ratio for saving. Number of pictures which can be recorded depends on
this setting and on 'PICT.StZE' (see left). (P.92)
inapplicable modes: I_ (_ _,_ SCN1SCN2
mSettings:
[] : Fine (priority to picture quality)
: Standard (increases recording capacity by limiting standard picture
size and picture quality)
Sounds can also be recorded with pictures. This is useful for conversation or memo
recording.
inapplicable modes: I_ I_ _I_ SON1SCN2
mSettings:
: No sound recording
ON : Record approx. 5 seconds of sound ([] displayed on screen)
@To cancel recording: Press 'MENU/SET'.
@Cannot be used with 'BURST' (P.54), 'STARRY SKY' (P.44) and 'AUTO BRACKET'
(P.38, DMC-TZ3 only).
@'DATE STAMP', 'RESIZE', 'TRIMMING', and 'ASPECT CONV.' cannot be used with
pictures with audio.
@Settings also reflected in AUDIO REC.' (P.6O) in REC ON CLIPBOARD menu.
Method of measuring exposure (R38) can be changed.
inApplicable modes: !_ I_ _,_
mSettings:
[] : (Multiple: Measures brightness of whole screen. Normally
recommended)
[] : (Center weighted: Measures entire picture evenly, with focus on center
of screen)
['_ :(Spot:Measuressubjectwithinspotmeteringtarget)L] I
Spot metering target
52 VQT1B61 VQT1B6153