Filter
Top Products
16 VQT1B61
Preparations
3
Setting the clock and language
While this message is displayed
Press
Adjust year, month, date, time
Select
Adjust
Set
Press
Turn on power again and check time
display.
Note
Failure to set the clock will mean
correct date will not be printed
(P.76) when printing pictures in
digital photo center or when using
DATE STAMP (P.66).
Time is displayed in 24-hour
format. Year can be set between
2000 and 2099.
Clock settings will be saved for
approx. 3 months even after
battery is removed, provided a
fully-charged battery was installed
in camera for the 24 hours
beforehand.
To change time setting
Select ‘CLOCK SET’ from SETUP
menu (P.18), perform and above,
and press .
To set local time at overseas
destination
‘WORLD TIME’ (P.49)
To set language
Select LANGUAGE (P.22) from SETUP
menu (P.20), and set to language
displayed on the monitor.
Example of SETUP menu setting
(P.18)
Set mode dial (P.13) to NORMAL PICTURE mode
before turning on power.
‘PLEASE SET THE CLOCK’ will be displayed when power is turned on for the first time.
EXITSELECT SET
CLOCK SET
2007
JAN
1000
DMY
:..
CANCEL
Select to change
date format
Power