Panasonic DMC-TZ3 Digital Camera User Manual


 
VQT1B61 45
Using flash in scene modes (P.37)
Tips, notes Main fixed settings
Age cannot be added after recording.
Age may be printed from a computer using the
supplied software (P.11).
Age can be stamped onto picture using ‘DATE
STAMP’ (P.66).
(P.43)
AF ASSIST LAMP default setting is ‘OFF’.
Others same as ‘BABY’ (P.42-45)
Same as for ‘BABY’ (P.43)
FLASH: FORCED OFF
AF ASSIST LAMP: OFF
SENSITIVITY: ISO100
Focus: Max. W: 5 cm (0.16 feet) and above
Max. T: 1 m (3.28 feet) and above
FLASH:
FORCED OFF
SENSITIVITY: ISO3200
Extended optical zoom and digital zoom cannot
be used.
Always use a tripod.
Self-timer recommended.
Do not move the camera until countdown has
ended.
To change shutter speed, press ‘MENU/SET’,
then , and select ‘STARRY SKY’.
‘EXPOSURE’, ‘AUTO BRACKET’ (DMC-TZ3
only), and ‘BURST’ cannot be used.
FLASH:
FORCED OFF
AUDIO REC.: OFF
CONT.AF: OFF
STABILIZER: OFF
SENSITIVITY: ISO100
SLOW SHUTTER: Cannot be set
Stand at least 10 m (32.8 feet) away.
Tripod recommended.
FLASH: FORCED OFF
SENSITIVITY: ISO100
CONT.AF: OFF/
AF ASSIST LAMP: OFF
Beware of sand and sea water.
Battery life is reduced in lower air temperatures.
Angle the camera towards areas of contrasting
colors when aligning the focus.
Check that the interior of the aircraft is not
reflected in the window.
FLASH:
FORCED OFF
AF ASSIST LAMP: OFF
For fast moving subjects, align with the AF area
and press (AF lock).
Press again to release.
Adjust red and blue levels with ‘white balance
fine adjustment’ (P.50).
Focus: Max. W: 5 cm (0.16 feet) and above
Max. T: 1 m (3.28 feet) and above
Self-timer: Cannot be used