Filter
Top Products
88 VQT1B61
Others
3
Q&A Troubleshooting (Continued)
TV, computer, printer
No image appears on TV. Image blurred or not colored.
Not connected correctly (P.79).
TV input setting not set to auxiliary input.
‘VIDEO OUT’ not set to ‘NTSC’ (P.22).
TV screen display different to LCD monitor.
Aspect ratio may be incorrect or edges may be cut off with certain televisions.
Cannot play motion pictures on TV.
Card is inserted into TV.
→ Connect with AV cable (supplied) and play on camera (P.79).
Picture is not displayed on full TV screen.
Check ‘TV ASPECT’ settings (P.22).
Cannot send pictures to computer.
Not connected correctly (P.74).
Check whether computer has recognized camera. (See separate ‘PC connection’)
Computer does not recognize card (only reads built-in memory).
Disconnect USB cable and reconnect with card in place.
I want to play computer pictures on my camera.
Use the supplied software PHOTOfunSTUDIO-viewer- to copy pictures from computer
to camera. To save to clipboard, use software to copy from computer to card, then
copy to clipboard folder with ‘COPY’ (P.73) in PLAY menu.
Cannot print when connecting to printer.
Printer not compatible with PictBridge.
Mode dial not set to .
Edges cut off pictures when printing.
Release any trimming or edgeless printing settings on printer before printing.
(Consult printer operating manual.)
Pictures taken on ‘ASPECT RATIO’ (P.51).
→ If printing in shop, check if 16:9 sizes can be printed.