Filter
Top Products
Before using
10
LSQT0974
Quick Guide
ª Charging the battery
1 Connect the AC Cable to the AC adaptor
and the AC main socket.
2 Put the battery on the battery mount by
aligning the mark, and then securely plug it
in.
ª
Attaching the battery
Push the battery against the battery holder and
slide it until it clicks.
ª
Inserting/removing a cassette
1 Slide the [OPEN/EJECT] lever and open the
cassette cover.
2 After the cassette holder is opened, insert/
remove the cassette.
3 Push the [PUSH] mark 1 in order to close
the cassette holder.
4 Only after the cassette holder is completely
housed, close the cassette cover.
ª
Inserting/removing a card
1 Open the card slot cover.
2 Insert/remove the card into/from the card
slot.
≥When inserting a card, face the label side 1
towards you and push it straight in with one
stroke as far as it goes.
≥When removing the card, open the card slot
cover and press the center of the card and
then pull it straight out.
3 Securely close the card slot cover.
ª
How to turn on the power
1 While pressing the button 1, set the [OFF/
ON] switch to [ON].
OPEN
/
EJEC
T
PUSH
1
1
OFF
ON
1
LSQT0974_ENG.book 10 ページ ２００５年１１月７日 月曜日 午前１１時５８分