Filter
Top Products
Menu
65
LSQT0974
Menus related to taking pictures
ª [DATE/TIME]
This switches between date and time indications.
≥The Camcorder automatically records the date
and time the picture was taken on the tape.
≥You can also show or change the date/time
indication by repeatedly pressing the [DATE/
TIME] button on the remote control.
ª
[AUDIO REC]
Switches the audio (PCM audio) recording
systems.
[12bit]: Records audio in “12 bit 32 kHz 4 tracks”.
(The original audio signals can be kept
after the other audio signals are dubbed.)
[16bit]: Records audio in “16 bit 48 kHz 2 tracks”.
Audio can be recorded in higher quality.
(If audio signals are dubbed, then the
original audio signals will be erased.)
ª
[REC LAMP]
Set to [ON] and this turns the recording lamp on
during recording, which indicates that recording is
underway. Set to [OFF] and this does not turn on
the lamp even when recording is underway.
ª
[DISPLAY]
Set to [ON] and the display mode can be switched
to all functions. Set to [OFF] and it can be
switched to minimum display.
ª
[BEEP SOUND]
Set to [ON] and confirmation/alarm beeps are
issued as follows.
1 Beep
≥When you start recording
≥When you turn on the power
≥
When the unit goes from quick start standby
mode to recording pause
2 Beeps
≥When you pause recording
≥When you turn off the power
≥When the unit goes into quick start standby
mode
2 Beeps for 4 times
≥When a cassette with its erasure prevention tab
set to [SAVE] is inserted, condensation occurs
(
-72-), and at other times. Check the sentence
displayed on the screen. (
-67-)
Menus related to playback
ª [REC DATA]
Set to [ON] and the settings (shutter speed, iris/
gain values, and white balance settings (
-40-),
etc.) used during the recordings are displayed
during playback.
≥If the [AUTO/MANUAL/FOCUS] switch was set
to [AUTO] when recording, [AUTO] appears on
the display.
≥When there is no data, [---] appears on the
display.
≥If data recorded on this unit is played back on
other equipment (or a tape recorded on other
equipment is played back on this unit), the
settings information is sometimes not displayed
normally.
ª
[AUDIO OUT]
This switches the sound to be played back.
[STEREO]: Stereo sound (main sound and sub
sound)
[L]: Left channel sound (main sound)
[R]: Right channel sound (sub sound)
Other menus
ª [JOYSTICK LED]
If set to [ON], the circumference of the joystick
lights up in blue during operation.
ª
[INITIAL SET]
When there is a menu that cannot be selected
depending on a combination of functions, set to
[YES] for changing the menu settings back to the
initial shipping condition.
(Language setting cannot be back to the initial
shipping condition.)
ª
[DEMO MODE]
If you set to [DEMO MODE] >> [ON] without
inserting a cassette and a card, the Camcorder is
automatically set to the demonstration mode for
introducing its functions. If any button is pressed
or operated, the demonstration mode is canceled.
If no operations take place for approx. 10
minutes, the demonstration mode automatically
starts. To terminate the demonstration mode,
insert a cassette or a card, or set to
[DEMO MODE] >> [OFF]. For normal use, set this
function to [OFF].
LSQT0974_ENG.book 65 ページ ２００５年１１月７日 月曜日 午前１１時５８分